News

Flood Modeller was used to highlight the impact of the River Thames Scheme on sediment transport and how the river will behave.

Flood Modeller was used to convert a non-real-time 1D-2D linked model into a real-time 1D model suitable for flood forecasting.

Flood Modeller's GPU solver, alongside Flood Platform, enabled the development of the Environment Agency's Flood Incident Mapper platform.

Flood Modeller enabled the modelling of complex flow paths in the while accurately representing the constriction from hydraulic structures.

Flood Modeller was used to route groundwater fluxes and produce flood depth results for nine high-risk flood areas.

Arup was commissioned by Cork County Council to design a comprehensive flood relief scheme for Midleton, Co. Cork, Ireland.

Flood Modeller enabled the simulation of flood water on the surface while dynamically linking to the subsurface drainage system.

A 1D-2D model was developed to simulate both fluvial and direct rainfall events for the Parramatta River.

Effectively modelling the flood mechanisms involving overland flow from an open channel and the subsequent overflowing of the sewer system.

Flood Modeller was used to perform dam-breach modelling for the Lane City Reservoir dam confirming its hazard classification.

Flood Modeller was used to develop a comprehensive national flood map for Taiwan (approximately 35,000 km²).